Bodie Stroud http://bodiestroud.com Hot Rods Thu, 17 May 2012 17:39:22 +0000 en hourly 1 http://wordpress.org/?v=3.3.1 The Craftmanship in Just a Motor Mount http://bodiestroud.com/the-craftmanship-in-just-a-motor-mount?utm_source=rss&utm_medium=rss&utm_campaign=the-craftmanship-in-just-a-motor-mount http://bodiestroud.com/the-craftmanship-in-just-a-motor-mount#comments Thu, 26 Apr 2012 01:03:22 +0000 admin http://bodiestroud.com/?p=2809 →]]> I’m sure there have been times when you were looking at a car and ended up staring at it for longer than necessary, especially if you’re a guy that can appreciate the craftsmanship behind every detail. We strive on detail, and factory motor mounts sitting under a new 2011 5.0 Aluminator were an eyesore on our 1965 Ford Mustang Project. So… like always… we built our own! The craftmanship put into every detail on this car will keep you staring for days. These bad boys are being stamped out as we speak and will be on the market for you to purchase soon.  See… we don’t want an eyesore looking at your car either… but for now Check out our Mustang Project here.





 

]]> http://bodiestroud.com/the-craftmanship-in-just-a-motor-mount/feed 0 Get Your First Look At Our EZ Align Adjusters http://bodiestroud.com/get-your-first-look-at-our-ez-align-adjusters?utm_source=rss&utm_medium=rss&utm_campaign=get-your-first-look-at-our-ez-align-adjusters http://bodiestroud.com/get-your-first-look-at-our-ez-align-adjusters#comments Sat, 07 Apr 2012 01:50:44 +0000 admin http://bodiestroud.com/?p=2785 →]]> Patent approved! We just got the OK to finally let you in on a secret project we’ve been working on in the shop. Bodie has been hard at work reinventing the wheel (so-to-speak). If you’ve ever had a hard time aligning your hot rod and gone through the hassle of taking your wheel off and putting it back on about ten times, then you know exactly what we’re talking about! Take a look at the one and only patented Camber and Caster EZ Align Adjuster invented by our very own Bodie Stroud. Our new adjusters are designed to turn any guy into an alignment master. Soon you will be able to buy your own B.S.I. IFS bolt-on kits for the ’64.5-’65 Ford Mustang, ’53-’56 F100 Pickup, and the ’55-’57 Tri-Five. So check back for updates and be the first in line for your own B.S.I. Front End Kit!

]]> http://bodiestroud.com/get-your-first-look-at-our-ez-align-adjusters/feed 0 Tour The Beach From The Comfort Of Your Barstool http://bodiestroud.com/tour-the-beach-from-the-comfort-of-your-barstool?utm_source=rss&utm_medium=rss&utm_campaign=tour-the-beach-from-the-comfort-of-your-barstool http://bodiestroud.com/tour-the-beach-from-the-comfort-of-your-barstool#comments Fri, 30 Mar 2012 00:30:07 +0000 admin http://bodiestroud.com/?p=2770 →]]> Check out the latest experiment in the shop. Frank and Jay from Beach Barcycle have brought us one of their toys to trick out. Soon you will be able to book your own beach tour on a foot pedaled barcycle with that signature BS Industries style. It’s something you just have to see to believe! Check them out at BeachBarcycle.com

]]> http://bodiestroud.com/tour-the-beach-from-the-comfort-of-your-barstool/feed 0 Bodie Stroud and the Scarliner Custom on CarCast with Adam Carolla http://bodiestroud.com/bodie-stroud-and-the-scarliner-custom-on-carcast-with-adam-carolla?utm_source=rss&utm_medium=rss&utm_campaign=bodie-stroud-and-the-scarliner-custom-on-carcast-with-adam-carolla http://bodiestroud.com/bodie-stroud-and-the-scarliner-custom-on-carcast-with-adam-carolla#comments Tue, 13 Mar 2012 21:27:52 +0000 admin http://bodiestroud.com/?p=2762

]]> http://bodiestroud.com/bodie-stroud-and-the-scarliner-custom-on-carcast-with-adam-carolla/feed 0 427 SOHC Cammer for the 1963.5 Ford Galaxie http://bodiestroud.com/427-sohc-cammer-for-the-63-galaxie?utm_source=rss&utm_medium=rss&utm_campaign=427-sohc-cammer-for-the-63-galaxie http://bodiestroud.com/427-sohc-cammer-for-the-63-galaxie#comments Wed, 08 Feb 2012 02:07:54 +0000 admin http://bodiestroud.com/?p=2751 →]]>

QMP Racing has done it again, they brought us another beast to wrap a car around. A 427 SOHC Cammer going into a 1963.5 R Code Ford Galaxie, putting out 750 horse power! Bodie talked to Brad Lagman, owner of QMP, on his radio show last Saturday. He unleashed the roar of his latest engine on the guys. If you’re ever in Chatsworth, CA stop by his shop to hear it for yourself or visit him on the web at www.qmpracing.com.

Photos by: Tim Sutton. www.timsuttonphotography.com

]]> http://bodiestroud.com/427-sohc-cammer-for-the-63-galaxie/feed 0 First Kick off Show http://bodiestroud.com/gnrs?utm_source=rss&utm_medium=rss&utm_campaign=gnrs http://bodiestroud.com/gnrs#comments Wed, 08 Feb 2012 00:27:04 +0000 admin http://bodiestroud.com/?p=2734 →]]>

Saturday January 28th we kicked off the First Radio show right smack in the middle of the main building at the Grand National Roadster Show! We had special guest John Buck, Show Manager of www.rodshows.com and the voice of The Tonight Show, Wally Wingert, who is also a customer of ours. Wally owns a 1974 Ford Gran Torino that is, yes, exactly like the one in “Starsky and Hutch”. You can find more about Wally at www.wallyontheweb.com. We also had Jesse Kershaw from Ford Racing who talked to the guys about new parts and of course, that (in Bodie’s words) “bitchin motor”, the 5.0 Aluminator. Mike Herman, owner of H&H flat heads was also on the show who is the “go-to” guy when it comes to flatheads, you can find Mike at www.flatheads-forever.com. Our last but not least special guest that day was Paul Michael Glaser, “Starsky” himself! How cool is that? It’s just one of those things that doesn’t happen every day. Paul talked about his latest book: Chrystallia and the Source of Light, which you can purchase at http://www.paulmichaelglaser.org/chrystallia.html.

It was a good show and a little nerve wracking being Bodie’s and Mitchell’s first Radio show! But it always takes a little diving in to cold water for it to really warm up. So we hope you all tune in every Saturday at 9:00am PST www.crntalk.com for more “In the Garage with Bodie Stroud”!

]]> http://bodiestroud.com/gnrs/feed 0 In The Garage with Bodie Stroud http://bodiestroud.com/in-the-garage-with-bodie-stroud?utm_source=rss&utm_medium=rss&utm_campaign=in-the-garage-with-bodie-stroud http://bodiestroud.com/in-the-garage-with-bodie-stroud#comments Tue, 17 Jan 2012 02:02:57 +0000 admin http://bodiestroud.com/?p=2715 →]]> Saturday January 28th at 9:00am – 10:00am PT
Bodie will be airing live at the
Grand National Roadster Show
Building 4
Pomona Fairplex.
1101 West McKinley Ave.
Pomona CA. 91768

It’s finally here! The Radio show you all have been waiting for!!
Thanks to Steele Rubber and CRNTalk.com
it’s finally happening!
Every Saturday at 9:00am PT you can tune in on any of the available Apps, Internet or HDtv
to listen, talk, or ask questions about classics cars, customs and hot rods.
So grab a stool and relax in the garage every Saturday with Bodie Stroud!

]]> http://bodiestroud.com/in-the-garage-with-bodie-stroud/feed 1 LS7- LS9 GM Performance Engine Build Experience http://bodiestroud.com/ls7-ls9-gm-performance-engine-build-experience?utm_source=rss&utm_medium=rss&utm_campaign=ls7-ls9-gm-performance-engine-build-experience http://bodiestroud.com/ls7-ls9-gm-performance-engine-build-experience#comments Thu, 08 Dec 2011 23:03:44 +0000 admin http://bodiestroud.com/?p=2644 →]]> Right now GM Performance is having a “Build Experience Program” for their LS7 and LS9 factory crate engines, If you purchase an LS7 and LS9, you will get to help build your engine with a specially trained engine builder at the GM Performance Build Center in Wixom, Michigan, and assist in it’s “Start to Finish Assembly” From installing the crankshaft in the cylinder block to topping off the engine with it’s intake system. And if you purchase the LS9 you will be installing the supercharger assembly! Upon Completion, Your personalized nameplate will be added to the enigne next to the GM Builder’s name marking the engine as a true one of a kind.
This would be a one of a kind Christmas Experience for a loved one, If you are interested in purchasing one of the LS motors, Let us help you give an experience of a lifetime this Christmas.
Call Today 818-768-7600

]]> http://bodiestroud.com/ls7-ls9-gm-performance-engine-build-experience/feed 2 ’63.5 Galaxie Custom Headers http://bodiestroud.com/63-5-galaxie-custom-headers?utm_source=rss&utm_medium=rss&utm_campaign=63-5-galaxie-custom-headers http://bodiestroud.com/63-5-galaxie-custom-headers#comments Wed, 16 Nov 2011 02:02:52 +0000 admin http://bodiestroud.com/?p=2540 →]]> We are finishing up the 2.25″ stainless steel custom headers for the 1963 Ford Galaxie, tig welded all the headers and now adding the finishing touches. We get our header kits from Cone Engineering in Los Alamitos CA. They offer an alignment tool to keep the headers straight, a bullet assembly tool, and even a U-bend marking and fixture tool to help cut your pipes right the first time. Their 100% mandrel bent header kits are built from high quality, thick-wall 16 gauge (.065”) OD tubing and they give the best combination of tubing that will save you a ton of money than buying them individually. Give us a call if you are interested in a kit as well as assembly and polish. 818-768-7600



]]> http://bodiestroud.com/63-5-galaxie-custom-headers/feed 2 Drive Magazine http://bodiestroud.com/drive-magazine?utm_source=rss&utm_medium=rss&utm_campaign=drive-magazine http://bodiestroud.com/drive-magazine#comments Thu, 13 Oct 2011 23:52:06 +0000 admin http://bodiestroud.com/?p=2506 Nov 2011

]]> http://bodiestroud.com/drive-magazine/feed 0